terminal block spliters

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126510
Printed Date: May 12, 2025 at 9:15 PM

Topic: terminal block spliters

Posted By: lemar
Subject: terminal block spliters
Date Posted: March 09, 2011 at 9:27 AM

Hi All.

I am going to be running multiple speakers off each channel on my amp and I was wondering if you can buy Terminal block splitters which 1 wire will go in and 2 will come out. obviously I can just do this with electrical tape but thought it would look better and be a more professional install with blocks.

If they do exist what are they called and could someone give me a link.

Many thanks.

Luke.

Replies:

Posted By: ExtremeProAudio
Date Posted: March 09, 2011 at 11:58 PM

I just insert separate speaker wires into the terminal on the amp when I install multiple speakers on one channel.

Posted By: DYohn
Date Posted: March 10, 2011 at 9:41 AM

Or use a barrier terminal strip if you want.

-------------
Support the12volt.com

Posted By: lemar
Date Posted: March 14, 2011 at 2:16 PM

I've decided to use normal terminal block and split the 1 copper wire into a fork and put each into separate terminal blocks. then run each separate block to the separate speakers.

Print Page | Close Window