Print Page | Close Window

rockford fosgate punch p500 2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126521
Printed Date: May 22, 2024 at 5:36 PM


Topic: rockford fosgate punch p500 2

Posted By: 69camaropower69
Subject: rockford fosgate punch p500 2
Date Posted: March 10, 2011 at 4:31 PM

Would this amp "Rockford Fosgate Punch P500-2" be a good one for my Kicker compvr 10" dvc 2ohm? Also what would be a good sized box it in a .73cu ft. box now?



Replies:

Posted By: ccityroadshop
Date Posted: March 13, 2011 at 1:00 AM
That amp is a little much for just one cvr, but it would definitely make it pound just be careful with the settings keep them tuned down because that amp will put out 500 watts if you bridge it and wire the subs voice coils in series to get the 4 ohm load, as far as box you are going to want a larger box depending on if you want ported or sealed i think a 1.5 cubic foot box would work nicely either way

-------------
mustang GT convertible with lots of performance mods... Alpine M500 amp with sealed enclosure, 10 inch kappa perfect, clarion cz500 head unit, kicker ks speakers all around





Print Page | Close Window