no power to kenwood kdc115s
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126541
Printed Date: May 12, 2025 at 8:37 AM
Topic: no power to kenwood kdc115s
Posted By: billmill5050
Subject: no power to kenwood kdc115s
Date Posted: March 12, 2011 at 1:20 AM
my factory audio receiver works but when i re installed installed my kenwood it has no power i took out of mazda b2600 ran red 12v+ switch and 12v + yellow constant wire to battery and ran black to ground on battery and hooked up speakers played fine dont under stand it used to work in truck fuses ok all wires getting power i grounded black coming out of hu to old hu framed any suggestions what to check
-------------
billmill5050
Replies:
Posted By: howie ll
Date Posted: March 17, 2011 at 9:51 AM
Is there a fuse on the back of the Kenwood unit? Check that also is there a reset button.
Please try to write in English with punctuation etc. It would be much easier to understand your post.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: i am an idiot
Date Posted: March 17, 2011 at 10:18 AM
What kind of vehicle?
|