99 dodge durango ipod integration

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126642
Printed Date: May 13, 2025 at 7:38 PM

Topic: 99 dodge durango ipod integration

Posted By: desh187
Subject: 99 dodge durango ipod integration
Date Posted: March 20, 2011 at 9:12 PM

Hi,
Has anyone installed an ipod integration unit on 99 Dodge Durango stock deck.I have a USA Spec pa11 hon and a cdl-cj cable which is supposed to plug into a changer port but there is none on the stock deck of the stock amplifier in passenger kick panel.
Any suggestions.Thanks

Replies:

Posted By: syl20rochon
Date Posted: May 10, 2011 at 5:56 PM

Check pac-audio website, you might find what you're looking for.

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Posted By: blanx218
Date Posted: May 10, 2011 at 10:19 PM

Pac-audio.com shows the radio must have these features for their product to work. Usually these features are standard no matter what brand of ipod interface you have.

1. Radio MUST have "Disc ^" printed on preset number one

2. 1999 Chrysler vehicles have one of two different style radios. These two radios use different harnesses. The shape of the radio face will determine which harness you will use. If your radio face is SQUARE, you will use the PXHCH1 harness. If your radio face is OVAL, you will use the PXHCH2 harness.

Posted By: djrankin004
Date Posted: May 11, 2011 at 1:53 PM

You should try the isimple IS77. You give it accessory power, ground it, and plug it into the antenna. Easiest install and pretty convienient. All other products seem to have some lag between the ipod and the factory deck, I do not recommend them.