Print Page | Close Window

subwoofer and amp hook up

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126748
Printed Date: May 16, 2024 at 8:21 AM


Topic: subwoofer and amp hook up

Posted By: paulwall6705
Subject: subwoofer and amp hook up
Date Posted: March 28, 2011 at 8:01 AM

I was wondering if you can help me out.i have a pioneer amp gm-5200t and i have two kicker 12' comp's c12-4 4ohm 300 watts and the guy i bought them from had it bridge to one channel and i don't know how he wired the two 12's to one channel. the box is not ported and have the jack's on both sides of the box for the speaker wires. i just don't want 2 blow them can you help me out the best way i should hook them up 1 or 2 channel..i'm  used 2 hooking amp's and sub's just a lil confused



Replies:

Posted By: paulwall6705
Date Posted: March 28, 2011 at 8:25 AM
posted_image 



Posted By: sthrnbmpn
Date Posted: March 29, 2011 at 12:49 AM
wire 1 sub to to get the 4 ohm bridged output of your amp.the only way to use both subs is to
  1. wire them in series for a 8 ohm load bridged
  2. 4 ohm load on each channel which is the same thing as 8ohm bridged mode


-------------
1000 watts of lp, now need sum hp an mids


Print Page | Close Window