hooking up subs to oem head unit

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126852
Printed Date: May 12, 2025 at 5:07 PM

Topic: hooking up subs to oem head unit

Posted By: pipes15
Subject: hooking up subs to oem head unit
Date Posted: April 05, 2011 at 12:36 PM

Hello, this might be a stupid question but here goes. I have a 2007 toyota avalon and I am installing two 10" subs with an amp. My question can I get a speaker input from the factory sub? Instead of running wires from the doors? Any help or input on wich way to do installation would be greatly appreciated! Peter.

-------------
PIPES

Replies:

Posted By: DYohn
Date Posted: April 05, 2011 at 7:00 PM

Yes, if your vehicle has a factory subwoofer you can use it to send a speaker level signal to an external subwoofer amp. Be aware that you will be using whatever OEM crossover settings are employed for the factory sub.

-------------
Support the12volt.com

Posted By: pipes15
Date Posted: April 05, 2011 at 7:06 PM

Thanks dyohn! I will try it then.

-------------
PIPES

Print Page | Close Window