2010 dodge ram w/alpine 10 speaker

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127634
Printed Date: May 15, 2025 at 9:46 PM

Topic: 2010 dodge ram w/alpine 10 speaker

Posted By: youraudioexpert
Subject: 2010 dodge ram w/alpine 10 speaker
Date Posted: June 14, 2011 at 5:23 PM

Customer has a 2010 Dodge Ram 3500 with the OEM Alpine 10 Speaker Audio navigation system

we are installing an JBL MS-8, speaker level in and ms8 to drive all OE speakers plus amp for 2 10" woofers.

the problem i am having is: i am getting no audio out of the OE amp after cutting the OEM speaker leads to T in the MS-8.

I know the system uses a fixed audio level from the deck to the OEM amp, and then CAN signals to adjust fad/balance/level.

has anyone successfully integrated into this style system.

-------------
Accessory Options / Auto Air & Heating

Replies:

Posted By: soundnsecurity
Date Posted: June 17, 2011 at 5:58 PM

did you cut a set of white and WHITE/ orange wires twisted to look like speaker wires? those are the CAN wires.

-------------

Posted By: youraudioexpert
Date Posted: June 17, 2011 at 7:29 PM

No.. LMAO
I Installed a LockPick ch550 at the same time,
i was having an issue with the ch550 shutting down,
come to find out i had 4 bent pins in the grey plug (data wires!! lol, everything is working now..

-------------
Accessory Options / Auto Air & Heating