trying to tap into the rear speaker wires
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127719
Printed Date: May 15, 2025 at 8:36 AM
Topic: trying to tap into the rear speaker wires
Posted By: schill1423
Subject: trying to tap into the rear speaker wires
Date Posted: June 23, 2011 at 8:13 AM
I have a 2011 Toyota tacoma and am trying to put a speaker box in. I am gonna tap off of the wiring for the rear speakers, but am in need of the wiring layout for the factory head unit to make sure I get the correct wires. Does anyone have the wiring layout for this head unit or one like it?
Replies:
Posted By: georgerocco
Date Posted: June 24, 2011 at 7:26 PM
Your speaker colors are red + and white - for the right, and black +, yellow - for the left.
Posted By: thecoolmankyle7
Date Posted: June 26, 2011 at 7:04 PM
What kinda speaker box are you tapping to your factory radio? most of the time they are not stable at lower ohm levels and have no protection from burrning up! If your going to put some kinda 6x9s in and unhook your factory speakers thats fine or if your putting a LOC in to add an amp to your factory radio you should be fine also, but I wouldnt "add" a speaker box to your radio.
|