running wires through door boot
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127801
Printed Date: May 15, 2025 at 2:37 AM
Topic: running wires through door boot
Posted By: everydaydiesel
Subject: running wires through door boot
Date Posted: July 03, 2011 at 12:52 PM
I have a 2007.5 dodge ram diesel that I am trying to run wires through to the door. Normally this is not a big deal but in this case the hole in the wall has a solid factory connector the size of the boot.
What are my options? Can I run my own boot?
-------------
2007.5 6.7L Cummins Diesel
Replies:
Posted By: dukesrebelyell
Date Posted: July 03, 2011 at 1:01 PM
you can take an empty portion of the connector and drill a hole through it. then just fish your wire through the new hole. pretty simple. easier than installing a whole new boot.
-------------
35 Hertz custom car audio and automotive fabrication
Posted By: KPierson
Date Posted: July 03, 2011 at 1:50 PM
https://www.the12volt.com/installbay/forum_posts.asp~TID~78731~PN~1
Make sure after you drill through the plug that you seal it back up, otherwise water will run down the wires and cause issues.
-------------
Kevin Pierson
Posted By: KPierson
Date Posted: July 03, 2011 at 1:52 PM
|