audiopipe txx-spl15 , thanks
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127960
Printed Date: July 06, 2025 at 4:46 PM
Topic: audiopipe txx-spl15 , thanks
Posted By: rebelz
Subject: audiopipe txx-spl15 , thanks
Date Posted: July 18, 2011 at 3:01 PM
hi everyone i bought this speaker and im having a hard time finding the spects for a slot ported box for it im a total noob in this department i would really like some help in building a box for my wagon thanks here are the spects i got Audiopipe TXX-SPL15
• 2500 Watts Power (PMPO)
• 1250 Watts Power (RMS)
• Frequency Response : 20-700Hz
• Sensitivity : 98 dB
• Extra Rigid Non Press Paper Cone
• Sand Blasted Die-cast Aluminum Basket
• Dual 3" 2 Ω 8-Layer Flat Black
Aluminum Voice Coil
• Dual Nomex Spider
• Mounting Depth: 230mm (9.05")
• 180 Oz Magnet
-------------
»ß4k¬Reß3Lz
Replies:
Posted By: douglas79
Date Posted: July 18, 2011 at 6:27 PM
Nothing in those specs indicates the enclosure that should be built...I checked their website and didn't see anything that pertained to enclosure dimensions. It's an SPL 15", so I would guess something onto the order of 3.5cuft with a tuning freq of 35-40hz...but you should definitely contact audiopipe to get exact dimensions.
Posted By: rebelz
Date Posted: July 18, 2011 at 6:31 PM
thanks for the reply i was wondering if a 4cubic would work and again remember im a noob lol so if i do what should the port size be ? for a 35-40 htz
-------------
»ß4k¬Reß3Lz
Posted By: douglas79
Date Posted: July 18, 2011 at 7:38 PM
I would STRONGLY suggest contacting audiopipe. I was just speculating...and I might be right, but I might be WAY off. The fs of that sub is 53hz which is REALLY high...so recommended tuning frequency could be as high as 50-60hz. It could be that the sub is designed for small enclosures and only needs 2.5cuft...it could be designed for HUGE enclosures and wants 5cuft...I would think a 4" diameter port would be adequate, but it may want a 5" or even 6" port. It would totally suck to spend the time and money to build a box for that sub only to have it come out sounding lousy or not give you the SPL that you are presumably hoping for. Technicians that I've dealt with from numerous sub/amp manufacturers love to "talk shop" from my experience...so just call up audiopipe (or email em) and you should be able to get you all the info you need. Plus I would think they'd be used to it...pretty much every manufacturer lists enclosure details on their website...since audiopipe doesn't they probably get calls all the time.
Posted By: haemphyst
Date Posted: July 20, 2011 at 10:37 AM
53Hz Fs? 98dB sensitivity? GARGH! That is a PA woofer, NOT a subwoofer! It's model number is accurate, though. SPL. 'Cuz that's all it's gonna do. It will NOT go deep.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: rebelz
Date Posted: July 20, 2011 at 10:44 AM
i got the spects from audio pipe TXX-SPL15
FS (HZ) = 45
RE = 2X1.8
LE (MH)= 0.81
QMS = 1.31
QES = 0.52
QTS = 0.44
VAS (CU.FT)= 1.29
VAS (LITER)= 36.8
X-MAX (MM) = 1.5 not a subwofer? it wont work in my car?  ------------- »ß4k¬Reß3Lz
Posted By: bluthunder04
Date Posted: July 23, 2011 at 10:57 PM
where did you find that sub im looking for 4 of them. and sre you sure thats 1.5 mm xmax and not 1.5 in
-------------
bass head for life
Posted By: rebelz
Date Posted: July 24, 2011 at 1:54 AM
bluthunder04 wrote:
where did you find that sub im looking for 4 of them. and sre you sure thats 1.5 mm xmax and not 1.5 in
well bro just wgat is posted there is what audio pipe sent me im a lazy kinda guy so i copied and pasted it here so yup thts it ------------- »ß4k¬Reß3Lz
|