4 15s wired at 2 ohms

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127984
Printed Date: June 05, 2024 at 3:56 PM

Topic: 4 15s wired at 2 ohms

Posted By: mofo15s
Subject: 4 15s wired at 2 ohms
Date Posted: July 20, 2011 at 10:30 AM

I Currently have 4 mofo 15" subs all dual 2 and i have 2 boss ph5000d amps. i was wondering what the best way to set this all up would be. the amps are 1ohm stable. it is currently set up with 2 subs per amp running at 2ohms.

Replies:

Posted By: mofo15s
Date Posted: July 20, 2011 at 11:07 AM

I want the loudest bass i can get. the boxes are built exactly to specs and ported.

Posted By: douglas79
Date Posted: July 20, 2011 at 12:00 PM

I think the best way to set it all up would be to set it all up against a wall and then drive into it head-first with a steam roller.

Posted By: sthrnbmpn
Date Posted: July 20, 2011 at 12:38 PM

ouch, no mercy^^^

its not the best set-up but i wouldnt steamroll it

-------------
1000 watts of lp, now need sum hp an mids

Posted By: mofo15s
Date Posted: July 20, 2011 at 5:09 PM

ok, i know its not the best out there but its what i have. task about how bad it is all you want i just want to know how to make it better using what i have

Posted By: i am an idiot
Date Posted: July 20, 2011 at 7:51 PM

With the drivers you have, 2 ohms per amp is the best you can do.

Print Page | Close Window