Print Page | Close Window

2011 kia optima sx

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128092
Printed Date: May 10, 2025 at 3:38 PM


Topic: 2011 kia optima sx

Posted By: berto1230781
Subject: 2011 kia optima sx
Date Posted: July 30, 2011 at 9:01 PM

hey guys i need the wiring for the stock radio. thanks no navagation/infinity package

-------------
roberto gonzalez



Replies:

Posted By: i am an idiot
Date Posted: July 31, 2011 at 12:10 AM
What are you trying to do?




Posted By: berto1230781
Date Posted: July 31, 2011 at 12:14 AM
i'm going to change the factory radio and speakers. replacing the front and rear speakers with components runing of the after market radio im going to put. not adding an amp beacuse i don't want to run cables into the doors thanks

-------------
roberto gonzalez




Posted By: i am an idiot
Date Posted: July 31, 2011 at 12:22 AM
     Battery          PINK          (+)          RADIO HARNESS          
     Accesory          PINK          (+)          RADIO HARNESS          
     Ground          BLACK          (-)          RADIO HARNESS          
     Illumination          RED          (+)          RADIO HARNESS          
     Dimmer          BLACK          (-)          RADIO HARNESS          
     Power Antenna          GREEN/ BLACK          (+)          RADIO HARNESS          
     Amp Turn On          YELLOW/ORANGE          (+)          RADIO HARNESS          
     Amp Location          BEHIND TRIM ON RIGHT SIDE OF TRUNK




Posted By: i am an idiot
Date Posted: July 31, 2011 at 12:28 AM
Most amplifiers do not require running new wires into the door.




Posted By: DYohn
Date Posted: July 31, 2011 at 9:08 AM
Metra 70-7304 wiring harness

-------------
Support the12volt.com




Posted By: berto1230781
Date Posted: July 31, 2011 at 10:54 AM
thanks guys for all the help i can always count some you guys in the forum thanks again one more thing i'm an idiot you said most amps doesn't require runing wires to doors please let me know witch one so i can do everything in one shot and also i guess those amps use the factory wire harness i guess right thanks again and love the name lol

-------------
roberto gonzalez





Print Page | Close Window