deadening cherokee
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128288
Printed Date: May 01, 2024 at 5:35 PM
Topic: deadening cherokee
Posted By: knotdrummer88
Subject: deadening cherokee
Date Posted: August 19, 2011 at 2:37 AM
hello there, i am sound deadening my jeep cherokee with 100 square feet of fat mat. my question is, what is the easiest way to get rid of the factory adhesives on the doors that hold that plastic cover on the door frame? i removed it all off of one door using some purple power, and a whole lot of rubbing. so is there any easier way to do this?
Replies:
Posted By: racerjames76
Date Posted: August 19, 2011 at 10:03 AM
Try mineral spirits, or denatured alcohol. The mineral spirits may work best for disolving the glue but will leave a slimey residue behind.
-------------
To master and control electricity is perfection. *evil laugh*
Posted By: knotdrummer88
Date Posted: August 19, 2011 at 3:33 PM
Thanks, and also to apply deadener, how clean does the metal have to be? Like its real clean just the towel left behind some tiny little pieces and streaks
Posted By: racerjames76
Date Posted: August 19, 2011 at 4:59 PM
If you dont think paint would stick to it, it probably isn't clean enough. Use a tack cloth to get rid of debris left behind.
-------------
To master and control electricity is perfection. *evil laugh*
|