two rf p3’s + boston gta 100m?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128335
Printed Date: May 11, 2025 at 12:10 AM

Topic: two rf p3’s + boston gta 100m?

Posted By: nfrank89
Subject: two rf p3’s + boston gta 100m?
Date Posted: August 23, 2011 at 2:28 PM

is there any foreseeable reason why i shouldn't/couldn't Run 2 12 in dual 2 ohm 600 watt rms rockford P3's wired to 2 ohms at the amp which is a mono Boston GTA-1000M 1000 watts rms @ 2ohms?

I'm asking because the alternative would be the rockford T1000-1bdCP at twice the cost... so what would be the downfalls of going woth the boston?

Replies:

Posted By: nfrank89
Date Posted: August 24, 2011 at 2:27 AM

any input?

Posted By: DYohn
Date Posted: August 24, 2011 at 10:39 AM

As lomg as the amp can handle the impedance, there's no problem. Be sure you set the gain correctly.

-------------
Support the12volt.com

Print Page | Close Window