kenwood head unit will not work

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128473
Printed Date: May 15, 2025 at 9:35 AM

Topic: kenwood head unit will not work

Posted By: jccunnin
Subject: kenwood head unit will not work
Date Posted: September 08, 2011 at 3:33 PM

I just perchased a truck and the kenwood head unit in it will not work. I took it out. I know it has a security code on it because I have the code but cannot get it to power on. I have hooked the unit directly to the battery the constant and the switched a long with ground and nothing not even the security light when the face is off. The fuse in the back looks fine. Just in case and pulled a fuse that I knew worked and put it in there and nothing. Any other ideas? Please Help.

Replies:

Posted By: lspker
Date Posted: September 08, 2011 at 8:19 PM

Could be cold solder joints on the plug, open and check.

Posted By: i am an idiot
Date Posted: September 08, 2011 at 9:41 PM

What is the model number of the Kenwood?

Print Page | Close Window