Print Page | Close Window

1999 mazda miata

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128626
Printed Date: May 16, 2024 at 6:33 PM


Topic: 1999 mazda miata

Posted By: craigmri
Subject: 1999 mazda miata
Date Posted: September 26, 2011 at 6:03 AM

Just installed a new JVC HU in my '99 Miata and I need help with fitment. It seems the new HU fits in about 1/8" to 3/16" too far recessed. Basically I removed the OEM radio and installed the DIN sleeve that came with the JVC radio. The outfit I bought the radio from also supplied an "installation kit" but all that consisted of was a new storage pocket below the radio that I didnt need/use.

So, does anyone have any tricks on how to shim out the Din sleeve so I can get things to sit flush with the existing dash components?



Thanks in advance.
Craighttps://forum.miata.net/vb/attachment.php?attachmentid=130201&d=1317034613
https://forum.miata.net/vb/attachment.php?attachmentid=130202&d=1317034627



Replies:

Posted By: craigmri
Date Posted: September 27, 2011 at 6:44 AM
OK I pulled stereo and played with the sleeve tabs to get sleeve to site out off the framework of dash a little and now the radio has a much better presentation than when I had the sleeve lip flush. I didn't realize the sleeve was designed to provide flexible and adjustable installs.

Craig


Print Page | Close Window