2006 pontiac pursuit new amp and sub

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128951
Printed Date: May 12, 2025 at 10:17 PM

Topic: 2006 pontiac pursuit new amp and sub

Posted By: 036333516
Subject: 2006 pontiac pursuit new amp and sub
Date Posted: October 24, 2011 at 11:29 AM

i have the Power and everything hooked up and running stable. the only thing i need is a signal to the amp to make everything work. I have the factory pioneer 4.1 system and have disassembled the dash and pulled the factor pioneer amp out, all i was told that i need to do is cut the end off the rca cables, and attach the cut ends to the wires that are dedicated to the stock sub going TO the amp not FROM. i was told that thi would save me from having to buy a line output convertor. I need help to know which wires are going TO the factory amp, and which of those power the stock sub's signal

-------------
OPTIMUS PURSUIT Activate

Replies:

Posted By: i am an idiot
Date Posted: October 24, 2011 at 5:29 PM

Save yourself some trouble and purchase the appropriate line out converter.

Posted By: 036333516
Date Posted: October 24, 2011 at 9:09 PM

it just stinks because they want 50-60$ for the box up here, i was looking for an cheaper and easier way to achieve a signal connection

-------------
OPTIMUS PURSUIT Activate

Posted By: soundnsecurity
Date Posted: October 25, 2011 at 2:58 PM

if your amp has a high level input then you dont even need RCAs just tap into the speaker wires from the factory sub like you would for an LOC.

-------------