pioneer avic z930bt
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129179
Printed Date: May 19, 2024 at 1:14 PM
Topic: pioneer avic z930bt
Posted By: killing switch
Subject: pioneer avic z930bt
Date Posted: November 11, 2011 at 12:12 AM
OK so last ditch effort to get this fixed: I have a avic930bt HU that i installed and it worked fine. I then installed a rockford fosgate 4 channel amp to run the power series rockford 6x8's in the door's.
The problem is that when I turn the volume up the HU reboots, it does retain memory.
I checked the RCA outs to the amp for shorts by swapping to a new pair and it does the same thing. i can have the HU's volume turned up and even one of the left or right RCA's plugged into the amp but the second i plug the other side in (if the HU is turned up) it will reboot. so to use my system i have to listen to it at way below preferred volume levels. I've come to know what volume level to keep it under but sometimes i will turn it up louder and i swear it seams to reboot when the music has the most going on in the song (power draw maybe?)
ALSO, I DO HAVE BAD ALT WHINE so maybe a bad ground(s)?
it worked fine before amps were installed so i don't really think its the HU but let me know what you think.
thanks in advance.
Replies:
Posted By: killing switch
Date Posted: November 11, 2011 at 12:15 AM
sorry i screwed up the subject. also this is on a 2011 ford f150 fx2 fyi
|