Print Page | Close Window

port advice

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129678
Printed Date: May 06, 2024 at 1:29 AM


Topic: port advice

Posted By: usc45cal
Subject: port advice
Date Posted: December 13, 2011 at 8:03 AM

i have a wedge box 30 wide 19 high 9 bd 6 td , with a slot port facing the drivers side of a 1996 reg cab s10 , my problem is i have amps behind the drivers seat and dont think im getting enough airflow , im running a re sxx and think i could do better on air flow but dont want to build another box , i was going to cap off the port and use a round port on the top , my question is , do i need to remove the old tuning port ??

thanks
jim



Replies:

Posted By: stevdart
Date Posted: December 17, 2011 at 4:11 PM
No, the old port can remain in the box.  It won't function as a resonator if it is sealed.  I've done this before myself.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.





Print Page | Close Window