Print Page | Close Window

going all digital, boosting pc signal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129738
Printed Date: May 05, 2024 at 11:38 PM


Topic: going all digital, boosting pc signal

Posted By: still_walkin
Subject: going all digital, boosting pc signal
Date Posted: December 18, 2011 at 11:41 AM

So here's the deal I made a custom car pc it works but the cable from the screen to the pc is like 3ft so I extended it and now the screen flickers. So im trying to rule out my Hu now. Is there any way I can boost my PC's sound signal to three different amps like a HU would Do. I was thinking active crossover but any suggestions

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"



Replies:

Posted By: oldspark
Date Posted: December 18, 2011 at 4:34 PM
A preamplifier - assuming it's a low level signal.

Though I am a bit confused - audio boosting for a screen flicker?
Is the flicker from noise (weak shielding or GND issues)?
And I would have expected no boosting required for the audio split - but that depends on relative impedances.

Love the irony - an analog booster for "going digital".
Get digital inputs instead...




Posted By: still_walkin
Date Posted: December 18, 2011 at 4:46 PM
No let me explain. The car pc has a cord thats 3ft long that goes from the pc to the screen and when I was bench testing it outside the car I extended the three get cable to a 15ft it flickered. So my solution to the problem is take my head unit out the car replace it with the car pc but my question is how do I boost that signal from my pc to my 3amps so I can have a cLean clear signal

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"





Print Page | Close Window