pioneer avic z130bt in lincoln ls

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129909
Printed Date: May 02, 2024 at 11:56 PM

Topic: pioneer avic z130bt in lincoln ls

Posted By: blownsaleen
Subject: pioneer avic z130bt in lincoln ls
Date Posted: December 28, 2011 at 4:44 PM

I'm trying to install the new in dash in my 02 ls. I'm having a hard time finding the speed sensor wire and the reverse input wire as well. Any help will be greatly appreciated.

Replies:

Posted By: jseibold
Date Posted: December 28, 2011 at 5:21 PM

Audiovox tech services says:

Speed Sense WHITE (+) AT ABCM UNDER HOOD
Reverse Lights BLACK/ RED (-) AT REM MODULE IN TRUNK

Sorry it did not say what pin number on the speed sense wire. On the reverse wire, you'll need to test it out with a DMM and then you'll probably need to use a relay to convert the negative signal to the positive signal that your head unit most likely requires. If that is the case then use a standard SPDT relay and connect it up like this:

Terminals 85 and 30=12v switched/accessory and don't forget to fuse it

Terminal 85=your BLACK/ RED reverse wire

Terminal 87=to your head unit's reverse input circuit

-------------

Posted By: offroadzj
Date Posted: December 29, 2011 at 2:15 PM

before installing the relay check the system settings on the unit and see if there is an option for (+) vs (-) Reverse wire input. On my Z2 I have the option of choosing the type of input that it is.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205