Print Page | Close Window

db link ring trminals

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130093
Printed Date: March 29, 2024 at 10:03 AM


Topic: db link ring trminals

Posted By: knotdrummer88
Subject: db link ring trminals
Date Posted: January 07, 2012 at 2:02 PM

Has anyone used the db link gold ring terminals? the ones that hold the wire in with the alen wrench screw? If so, how do these compare to regular ring terminals that you solder the wire into?



Replies:

Posted By: tedmond
Date Posted: January 10, 2012 at 7:33 AM
correctly soldered terminals will be better, than a single screw holding the wire in place any day

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: xchrisx
Date Posted: January 12, 2012 at 2:34 PM
I have to agree with tedmond. I am sure the screw terminals will work, but what happens when the bass continuously hits...it causes vibrations and I would'nt want to chance that with my wires being held in by screw terminals, it would suck to have your wires falling out all the time...or even once in a while. Stick to soldered terminals, plus they're cheaper.

-------------
BP





Print Page | Close Window