Print Page | Close Window

Head unit and stearing wheel controls

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13052
Printed Date: May 28, 2024 at 9:38 PM


Topic: Head unit and stearing wheel controls

Posted By: jbesherse
Subject: Head unit and stearing wheel controls
Date Posted: May 01, 2003 at 11:03 PM

I have a 2001 Mitsu. Diamante.  I need to know if there is any way to maintain the conrols on the stearing wheel if I chnge out the factory unit to an aftermarke Kenwood with a remote?

-------------
Jon Besherse



Replies:

Posted By: wvsquirrel
Date Posted: May 02, 2003 at 12:54 AM
Stupid question, but is the Kenwood remote wired or wireless?

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com



Posted By: mattwho
Date Posted: May 02, 2003 at 7:33 AM

You can use a Steering Wheel Interface made by PAC.  The PAC SWI-X works like a universal learninf remote, you wire it to the steering wheel controls and then program it using the Kewood remote.  Hope the kenwood comes with a IR remote.

I installed one and it was pretty straight forward, good luck.



-------------
mattwho?


Print Page | Close Window