kfc w112s wiring parallel kac 5204 amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130798
Printed Date: May 15, 2024 at 1:24 PM
Topic: kfc w112s wiring parallel kac 5204 amp
Posted By: shadow818
Subject: kfc w112s wiring parallel kac 5204 amp
Date Posted: March 02, 2012 at 7:34 PM
Ok I'm kinda of lost on how to wire this subs in an enclosed dual sub box subs to terminals on box and the box terminals to the amp also there is no hole in the enclosed box to parallel them together should I make one for the wires ?
Replies:
Posted By: oldspark
Date Posted: March 02, 2012 at 9:54 PM
You mean the box has no speaker terminals AND that you want the amp in the box? (Wire the amp direct and add new terminals for the amp inputs etc.)
But an amp IN the box??? IMO no way!
Posted By: co_ne_dub
Date Posted: March 02, 2012 at 11:11 PM
Drill a hole large enough for your speaker wire to go through the middle partition.
Connect bot positives and bot negatives together.
Run that to ONE terminal on the inside of the box.
Wire that terminal to your amp(*bridged)
Those are single 8ohm subs.
By doing this it will bring the final impedance to 4ohms.
That amp should produce # 150w at 4ohm mono.
|