power acoustik volume issue

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131454
Printed Date: April 27, 2024 at 2:12 AM

Topic: power acoustik volume issue

Posted By: desh187
Subject: power acoustik volume issue
Date Posted: May 20, 2012 at 6:59 PM

Hi just installed a new Power Acoustik PD-718NB touch screen din with double din face on a 2001 Dodge Ram with Pac IR steering wheel interface.
Everything works fine until the unit is switched off.When turned on,the volume automatically jumps to 12 even if it is turned down to Zero before switching off.
Could it just be a defective head unit or a setting.
Thanks

Replies:

Posted By: DYohn
Date Posted: May 20, 2012 at 7:31 PM

Check your owner's manual for a power-on default volume setting.

-------------
Support the12volt.com

Posted By: i am an idiot
Date Posted: May 20, 2012 at 9:03 PM

Set the volume to whatever level you want it to come on at. Then press and hold the volume knob for 5 sieconds.

This is how it is done on many of the units of that caliber.

Print Page | Close Window