strapping 2 aq1200d amplifiers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131538
Printed Date: September 16, 2025 at 12:26 AM

Topic: strapping 2 aq1200d amplifiers

Posted By: khonerla
Subject: strapping 2 aq1200d amplifiers
Date Posted: June 04, 2012 at 12:38 PM

I have 4 12 MTX TR5500 dual 4ohm subwoofers. I was wondering if and how I would strap 2 AQ1200D together, or would it be better to run them separate.

Replies:

Posted By: i am an idiot
Date Posted: June 04, 2012 at 10:02 PM

What is the minimum safe operating impedance of those amplifiers? Minimum safe per amp, not strapped?

Posted By: khonerla
Date Posted: June 04, 2012 at 10:05 PM

strapped its 2 ohms separate its 1 ohm

Posted By: i am an idiot
Date Posted: June 05, 2012 at 8:18 AM

Option 2 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono

Print Page | Close Window