l5s and kac8101d
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131598
Printed Date: April 28, 2024 at 7:36 PM
Topic: l5s and kac8101d
Posted By: johnnybbad
Subject: l5s and kac8101d
Date Posted: June 12, 2012 at 10:34 PM
I was hoping to get some help. I have 2 12 inch l5,s duel 2ohm voice coils, I also have a kac8101d amp from what I can get from reading it looks like I need a better amp. Untill I get one can I use this amp and if so what would be the best way to wire amp and speakers. I think the amp can handle only 4ohm load when bridged. But I read conflicting specs on line about this amp does any one know the right specs on this amp, Any help would so much be appriciated
-------------
jonny
2000 accord
Replies:
Posted By: i am an idiot
Date Posted: June 12, 2012 at 10:58 PM
Isn't that a 1 channel amplifier?
Posted By: lspker
Date Posted: June 14, 2012 at 10:20 PM
yes 2 ohm mono, you will need to run 4 ohm with your subs, good news is that amp seems to produce close to the same output at either 2 or 4 ohm......by the time you series/parrallel your vc youll be close to 3 ohms
Posted By: i am an idiot
Date Posted: June 15, 2012 at 8:51 AM
With 2 DuAl 2 ohm drivers, your final impedance choices are (.)5 ohm, 2 ohm or 8 ohm.
|