too many input outlets

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13162
Printed Date: July 26, 2025 at 5:35 PM

Topic: too many input outlets

Posted By: monte_old _skol
Subject: too many input outlets
Date Posted: May 05, 2003 at 8:19 AM

I'm trying to wire my 4 channel amp for a bridged sub hookup but when I went to connect my RCA jacks the amp has 1,2,3,4 channel on the amp.The jacks from the radio is only two. I want the subs to run off of channels 1 and 3 or 2 and 4 for a bridge but I dont know about the RCA jacks?Can someone help this beginner out?Thanks

Replies:

Posted By: bberman1
Date Posted: May 05, 2003 at 8:42 AM

Get a Y adapter and it will split your 2 channels into 4, so you will have 4 inputs.

Posted By: greenbroncoguy
Date Posted: May 06, 2003 at 6:24 AM

yes just get the splitters bberman1 said

Posted By: monte_old _skol
Date Posted: May 07, 2003 at 8:29 AM

Hey thanks I didnt know I need splitters for bridging two subs off of a 4 channel amp.

Posted By: monte_old _skol
Date Posted: May 07, 2003 at 8:31 AM

I only have 2 inputs and 2 outputs sorry for the confusion

Print Page | Close Window