10 w7 enclosure for small truck

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131628
Printed Date: May 11, 2025 at 9:16 PM

Topic: 10 w7 enclosure for small truck

Posted By: ddiggler357
Subject: 10 w7 enclosure for small truck
Date Posted: June 15, 2012 at 9:14 PM

Anybody had any luck putting one of these in a single can pu without using fiberglass ??? All I found was a couple failures when I searched. If anyone has any ideas , pics , words of I would be so freaking grateful...

Replies:

Posted By: soundnsecurity
Date Posted: June 15, 2012 at 10:32 PM

you could make a center console box. you can make a custom bass tube from industrial PVC, you can go as far as cutting out the back wall for a blow-through box if you have a bed cover of any kind. it all depends on how badly you want it installed. i see you are in louisiana so if you are in the new orleans area then i can help you personally.

-------------

Print Page | Close Window