clarion am/fm radio model rp 408l

Help! I am replacing a Clarion AM/FM Radio in my 1979 Datsun 280ZX. The wiring diagram provided provided for my car does not align with what I have in my car.

In my car my radio has a 5 wire "plug in" and a 3 wire "plug in" in the back of the radio. Here is the breakdown of the color scheme for each of the wires":

1. BLACK/ Red Stripe
2. RED / Blue Stripe
3. BLACK/ White Stripe
4. WHITE/ Red Stripe
5. YELLOW /GREEN Stripe

1. BROWN / White Stripe
2. Green
3. GREEN/ Black Stripe

My Datsun was built in 12/78 and the radio is Clarion Model RP-408L. Can you help me to find what these wires go to?

Thanks!

GRJ

-------------
GRJ

     Battery RED / BLACK (+) RADIO HARNESS
     Accessory BLUE (+) RADIO HARNESS
     Ground N/A
     Illumination RED / YELLOW (+) RADIO HARNESS
     Dimmer N/A
     LF Speaker (+) BLUE/WHITE
     LF Speaker (-) BLUE / YELLOW
     RF Speaker (+) BROWN
     RF Speaker (-) BROWN / WHITE
     LR Speaker (+) RED
     LR Speaker (-) GREEN
     RR Speaker (+) BLUE
     RR Speaker (-) PINK

I appreciate the post, but my wiring set is a bit different from what you have posted. My oem radio is not stereo, but is am/fm and I have a single speaker up front in the dash and two rear speakers behind the front seats.
I have two plug ins, the first has five wires with following colors:
1.BLACK/ Red Stripe
2. RED / Blue Stripe
3. BLACK/ White Stripe
4. WHITE/ Red Stripe
5. YELLOW /GREEN Stripe
The second plug in has the following colors:
1.BROWN / White Stripe
2. Green
3. GREEN/ Black Stripe
Unfortunately this configuration does not seem to line up with the configuration you posted. My radio is a Clarion RP-408L. Not sure how to proceed.


-------------
GRJ

Go directly to the speakers and see what colors are connected to them.
Take a DMM and test sets of wires for, voltage and resistance.