problem with subs cutting with bluetooth
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132116
Printed Date: May 17, 2024 at 9:21 PM
Topic: problem with subs cutting with bluetooth
Posted By: miguel_2753
Subject: problem with subs cutting with bluetooth
Date Posted: August 31, 2012 at 8:14 PM
I have a problem with my bluetooth cutting my subs out when it gets hooked up. I have a kenwood double din with a eq and a alpine m1000. When i go to hook my phone via bluetooth they cut out but they work with the radio and cd...... Any suggestion
Replies:
Posted By: auto enhancers
Date Posted: August 31, 2012 at 8:52 PM
We need more info. As in do they cut out when pairing the phone or making calls. Is the Bluetooth built in to the head unit or seperate. Do you have the mute wire( if there is one) hooked up to anything.
Posted By: miguel_2753
Date Posted: August 31, 2012 at 9:32 PM
The bluetooth is built in into the unit. They cut out when i start playing music through my phone. Finally the mute wire is not hooked up to anything. Does it need to be hooked up?
Posted By: DYohn
Date Posted: September 01, 2012 at 8:43 AM
What's the model number of your HU? ------------- Support the12volt.com
Posted By: miguel_2753
Date Posted: September 01, 2012 at 10:13 AM
Kenwood ddx 619 is last years models
Posted By: DYohn
Date Posted: September 01, 2012 at 10:35 AM
Do you mean DDX6019? ------------- Support the12volt.com
Posted By: miguel_2753
Date Posted: September 01, 2012 at 10:47 AM
Yea sorry
Posted By: DYohn
Date Posted: September 01, 2012 at 11:34 AM
OK, so you're using the KCA-BT300 Bluetooth adapter? ------------- Support the12volt.com
Posted By: miguel_2753
Date Posted: September 01, 2012 at 1:07 PM
Sorry for the miss understanding but is actually a kenwood ddx 418 with built in bluetooth
Posted By: i am an idiot
Date Posted: September 01, 2012 at 1:24 PM
When listening to BT audio, is the bass amp powered up?
Posted By: DYohn
Date Posted: September 01, 2012 at 1:29 PM
OK. So, if your phone supports A2DP Bluetooth protocol and is properly paired with the DDX418, it should stream music properly. If on the other hand the phone does not support A2DP or is not on Kenwood's list of supported models, then the head unit may be cutting out the subs because it thinks the BT information is a phone call. Assuming your phone is properly supported by Kenwood, if the subs are only turning off via the phone and they cut off every time you try it, you could have a setup parameter wrong in the HU. I would try resetting the HU and setting it up again from scratch, and if that doesn't work it may be time for a visit to a local Kenwood installer for some hands-on assistance. ------------- Support the12volt.com
Posted By: montythegreat
Date Posted: September 04, 2012 at 11:29 AM
Sounds like a connection issue between your subs and radio and not the phone and radio.
|