hi lo input ajustement

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132150
Printed Date: May 14, 2025 at 9:00 PM

Topic: hi lo input ajustement

Posted By: chicyan
Subject: hi lo input ajustement
Date Posted: September 06, 2012 at 7:27 PM

Hi i was wondering if anybody know how to make a ajustable h-low input signal? Explanation i installed subwoofers on my CLS500 with the hi-lo input on my amplifier, but i was wondering if there a way to put some sort of potentionemeter, on the signal to have some sort of bass ajustment in the front ? like what you put on RCA but a would like something for hi-low signal ?

Any help would be great

Replies:

Posted By: i am an idiot
Date Posted: September 06, 2012 at 8:26 PM

https://pac-audio.com/productDetails.aspx?Productid=636&CategoryID=28

Posted By: chicyan
Date Posted: September 06, 2012 at 8:42 PM

Thanks for the fast responce.. but my complete set up uses hi input on amplifier. so i would have to change the hole set up to low input(RCA's) to install the LC-2. I was maybe thinking of an l-pad... but i would prefer something allready made

Thanks

Print Page | Close Window