2 punch t1500bd amps
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132169
Printed Date: May 13, 2025 at 12:34 PM
Topic: 2 punch t1500bd amps
Posted By: 14skitzlok
Subject: 2 punch t1500bd amps
Date Posted: September 11, 2012 at 10:15 AM
I am installing two punch power t1500bd amps. They are mono amps, and each one will be wired to a dedicated sub. I am wondering if there is a way to hook up one bass knob for both amps?
-------------
ZBARRETT
Replies:
Posted By: Velocity Motors
Date Posted: September 11, 2012 at 11:57 AM
Try a telephone splitter. Not sure if it will work but it's the same idea. They're inexpensive and easily purchased from any computer shop that deals with DSL internet.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: tommy...
Date Posted: September 11, 2012 at 4:45 PM
Are you using 1 set of RCA's to provide the Signal to Both amps by-way-of some Y Adapters. If so, they do have Knobs that can be installed on the RCA.
PAC-LC1 I believe...
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: 14skitzlok
Date Posted: September 11, 2012 at 8:18 PM
I've heard that, but I wanted to use the amp's bass boost. Thanks
-------------
ZBARRETT
|