Print Page | Close Window

rockford amp not working

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133075
Printed Date: May 18, 2025 at 1:45 AM


Topic: rockford amp not working

Posted By: jrhall
Subject: rockford amp not working
Date Posted: December 24, 2012 at 10:07 PM

I have a P1000-1bd that doesn't work. There is a part that has broken on the board but doesn't have a part number. I can't post a pic but it is a blue cylindrical piece that has 4 bands around it. Does anyone know what this is?



Replies:

Posted By: i am an idiot
Date Posted: December 24, 2012 at 10:25 PM
Sounds like it could be a resistor. There should be a component number on the board where it came from. R***



Posted By: jrhall
Date Posted: December 25, 2012 at 11:13 AM
It is not a resistor and there is not a part number.
posted_image


-------------



Posted By: soundnsecurity
Date Posted: December 25, 2012 at 12:10 PM
looks like a resistor to me.

-------------



Posted By: i am an idiot
Date Posted: December 25, 2012 at 4:30 PM
According to information I have it is a 30 ohm device. Can you take a picture covering about 10 times the area of the circuit board?

According to info I gather from the picture, it is a 10 or 20 ohm device. However the brown ring could be the orange band that I think it is. What are the numbers on the device labeled Q10? ?


Print Page | Close Window