Print Page | Close Window

outputs on decks when hooking up to an eg

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133666
Printed Date: May 21, 2024 at 1:23 PM


Topic: outputs on decks when hooking up to an eg

Posted By: fishin-family
Subject: outputs on decks when hooking up to an eg
Date Posted: February 22, 2013 at 8:13 PM

I have a newer pioneer it has two rca out puts 1 for front and 1 for rear/sub as listed on the back of the deck.I am going to bee hooking up to a CONCORD CEQ-7. Which of the 2 out puts should I use???? And will I still need to use 2 ground loop isolaters?? please e-mail me mfg31104@verizon.net



Replies:

Posted By: fishin-family
Date Posted: February 22, 2013 at 8:17 PM
All of this is in a 1994 DODGE DAKOTA EXTENDED CAB for amps I'm running a POLK 660PA for my highs, and for my lows I'm running a KENWOOD 1000 watt class D mono sub amp. I need help!!!!!!!!!!!!! It was so much easier when decks had 1 rca output.


Print Page | Close Window