variable l pad to reduce tweeter
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133773
Printed Date: April 30, 2024 at 2:51 AM
Topic: variable l pad to reduce tweeter
Posted By: fuster
Subject: variable l pad to reduce tweeter
Date Posted: March 04, 2013 at 8:48 PM
Hi all:
Can I wire a variable L Pad after the crossover to reduce the power going to a tweeter?
Are there other options besides the L Pad?
Thanks,
Mike
------------- Chronic, late stage optimist.
Replies:
Posted By: haemphyst
Date Posted: March 05, 2013 at 7:25 AM
First, a little lesson, and this is for informational purposes only...
An L-pad *IS* variable. Saying "variable L-pad" is like saying "VIN number" or "ATM machine".
Second, if you want a dedicated volume control for the tweeter only, then no, the L-pad is your choice. Make certain you choose one rated for the power and the impedance of your tweeter, i.e. 20W/4ohms.
------------- It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: fuster
Date Posted: March 05, 2013 at 4:04 PM
Hi, thanks for the reply.
I want to limit the power going to the tweeters. So they don't fry. I figure I could wire an L pad after the crossover and use it to attenuate the power.
------------- Chronic, late stage optimist.
|