wiring and amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133903
Printed Date: May 21, 2024 at 3:34 PM
Topic: wiring and amp
Posted By: higgssauce
Subject: wiring and amp
Date Posted: March 21, 2013 at 4:31 PM
I have 10 selenium 6w4p 6 inch speakers, they are 8 ohm and 200 watt/100 cont.... I am wondering how to wire them and what is a good reasonable priced amp to push them? If it helps I will be putting 2 in the dash and 4 in each of the 2 doors....
Replies:
Posted By: namesmeanlittle
Date Posted: March 21, 2013 at 7:38 PM
ok so i have no clue what highs you have or want
but if your all hell bent in using 10
no prob
8 would be best for wiring options
for straight subs and lows i have a mtx td 1000
it would do perfect its mono may be more that what you need cheap though only about $300 would wire it 5 rows and double up the subs use 16 gage wire at minimal to prevent ohms from the wire killing your sub input levels
i have no clue what mids will sound like on the amp may not do well
if your after the whole 2 channel mid bit as well
just bumming around
Coustic 300W RMS 4-Channel Amplifier for 8 subs split to 4 ohms
suppose to sound better
|