2 amps to 1pair highs in stereo?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134572
Printed Date: July 07, 2025 at 10:51 PM
Topic: 2 amps to 1pair highs in stereo?
Posted By: diggyd357
Subject: 2 amps to 1pair highs in stereo?
Date Posted: July 20, 2013 at 6:30 AM
I have a question. ... I have a pair of Morel 5 1/4's that require about 100w rms to shine. I have a small old school pioneer that's 35w x 2 or 100w briged. I bridged it and put it to one side and that one speaker sounds AMAZING ! So I ordered another one off ebay for the other side. I have a really nice SQ set up and I hate to lose my stereo sound in my front stage. What I was wondering was if I could use Y splitters to make 2 left channels and 2 right channels from one set of outputs and then run 2 left channels to one amp and 2 right channels to the other to achieve stereo sound ? Its just a theory, but I'm dying to know if and why this would or would not work. Thanks !!!!
Replies:
Posted By: i am an idiot
Date Posted: July 20, 2013 at 10:11 AM
That is how it should be done.
Posted By: diggyd357
Date Posted: July 20, 2013 at 11:19 AM
Ok great ! That's EXACTLY what I was hoping to hear.
-------------
I said it before and I'll say it again _ a gun I'm the son of a mack 10.....I'm hellbound. Ruthless Juveniles
|