amp, subs, wiring problem
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134630
Printed Date: May 15, 2025 at 5:09 AM
Topic: amp, subs, wiring problem
Posted By: blurry_121
Subject: amp, subs, wiring problem
Date Posted: July 30, 2013 at 8:16 AM
i have my two dvc 12" 2 ohm subs fitted all in by a shop but i needed boot space so i decided to un plug it all but when i tryed fitting it, both subs begin to pop even on the lowest volume, i think its how i connected the wires which go from the 2 chan amp to the poss and neg ports on the back of the sub box, bacically i connected the 2 poss termials from the back of the box to the 2 poss terminals on the amp and same with the neg, is this wrong? im a total dumbie on this kinda thing can anyone help me?
matthew
Replies:
Posted By: soundnsecurity
Date Posted: July 30, 2013 at 7:28 PM
if its a 2 channel amp you need to make sure you dont cross up the positive speaker wires and the negative ones. keep the positive and negative from one side on a single channel and the other pair of wires on the other channel.
Posted By: blurry_121
Date Posted: July 31, 2013 at 4:04 AM
yeah mate there not crossed in any way, is that correct though the way i wired them?
Posted By: DYohn
Date Posted: July 31, 2013 at 10:30 AM
What's the amp? Is it 2-ohm stable? How did you set the gain? ------------- Support the12volt.com
|