memphis audio st200 2 ohm stable?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135089
Printed Date: April 28, 2024 at 2:13 AM
Topic: memphis audio st200 2 ohm stable?
Posted By: nightowl2
Subject: memphis audio st200 2 ohm stable?
Date Posted: October 17, 2013 at 9:37 AM
I have been looking everywhere for the answer to this question. Is the Memphis Audio ST200 2 ohm stable bridged? I am going to assume it is as I know they have quality products and I have had it wire up with a single DVC 4 ohm sub at 2 ohms, ran it for at least an hour, and it does not get hot...a little warm, but the amp does not get as hot as it does when sitting in the hot sun all day.
I have sent an e-mail to Memphis Audio requesting that information, but I don't know when they will be able to get back to me. If they do, and this question is not answered, I will post their response.
Replies:
Posted By: nightowl2
Date Posted: October 17, 2013 at 2:29 PM
So, Memphis Audio responded. I was advised the Memphis Audio amp I have is the 16-ST200 and it is not 2 ohm stable bridged, which makes me wonder...did I receive an improperly labeled 8 ohm DVC sub instead of a 4 ohm DVC sub?
|