1964 kriesler mono radio wiring
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135248
Printed Date: May 15, 2025 at 9:19 AM
Topic: 1964 kriesler mono radio wiring
Posted By: cruza
Subject: 1964 kriesler mono radio wiring
Date Posted: November 09, 2013 at 10:51 PM
the wires coming out of this mono radio are one single yellow wire about 15 amp and in a sheath a very light red single wire and a very light green wire both have like a wire mesh (shield?) around them. I guess the yellow would be power. only a single speaker will be used, so is the RED / green for the speaker pos and neg? what do i do with the shield wire, I'm restoring an old 1950's car. thanks for your help
-------------
I might be old, but I aint dead yet
Replies:
Posted By: powerslave
Date Posted: November 25, 2013 at 10:41 PM
The shield is already broken, you don't have to use it. If you must, you can ground it. It was probably for a connecter with four pins, and the shield grounds the connecter, sort of how a Coax Cable F connecter is grounded with that shield. That's my guess...
|