bit one

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135737
Printed Date: May 09, 2025 at 9:31 PM

Topic: bit one

Posted By: wrench722
Subject: bit one
Date Posted: January 06, 2014 at 5:58 PM

I have two Bit One's, one is used for my highs, mids and mid/bass. I want to use the other one for my subs and trying to calibrate the master input levels with sub R/L RCA's out of AVH-P8400BH, it keeps saying (Input Level too low). Should I hook up the front R/L to it and do the calibration and remove the front R/L and hook the sub R/L back up?

-------------
Too Loud Too Old

Replies:

Posted By: DYohn
Date Posted: January 12, 2014 at 9:56 AM

Make sure the subwoofer output on your Pioneer is turned on and set the level to max. See page 58 of your owner's manual. Also make sure you are playing a test tone that is in the subwoofer pass band.

-------------
Support the12volt.com

Print Page | Close Window