using a high/low level converter?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13596
Printed Date: May 04, 2024 at 9:47 AM

Topic: using a high/low level converter?

Posted By: emorse2323
Subject: using a high/low level converter?
Date Posted: May 16, 2003 at 8:59 AM

IF you use a convertor because of a factory radio what do you use for the remote wire?? Also what is the best to do tap into the front or back speakers?
thanks

Replies:

Posted By: bberman1
Date Posted: May 16, 2003 at 9:12 AM

For the remote I usually tap into the radios switched 12 volt that turns the factory radio on and off with the ignition. If the car dose not have one then I will find another switched 12 volt source. As far as taping into the front and back speakers it depends on the car. What kind of car are you referring to?

Posted By: emorse2323
Date Posted: May 16, 2003 at 2:17 PM

The car is a 2003 nissan maxima

Print Page | Close Window