2012 camry se factory ohm load?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136098
Printed Date: May 13, 2024 at 9:58 AM
Topic: 2012 camry se factory ohm load?
Posted By: cedcodgy1450
Subject: 2012 camry se factory ohm load?
Date Posted: February 19, 2014 at 8:32 AM
I have a 2012 Camry Se without nav/entune/jbl and am thinking about dropping in a set of aftermarket speakers just to get a little better sound quality. I will be keeping the factory radio and was wondering does anyone know or know where I can find the ohm load of the factory system? 2ohm? 4ohm?
Replies:
Posted By: soundnsecurity
Date Posted: February 19, 2014 at 5:44 PM
form my experience the toyota JBL system usually has 2 ohm speakers but that could change from car to car. my advice is to pull a speaker and check it yourself with a meter. if you have speakers in your back deck then you might be able to access the speakers from the trunk without having to remove anything, just unplug the connector and test the terminals or maybe the ohm load will be printed on the back of the speaker.
|