what output am i getting from my amp?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137250
Printed Date: May 12, 2025 at 7:44 AM
Topic: what output am i getting from my amp?
Posted By: leigh.white
Subject: what output am i getting from my amp?
Date Posted: September 13, 2014 at 2:40 PM
Hi everyone
I'm just trying to clarify what I think I already know? I have a vibe slick a4 amp and a vibe slick 12inch sub-400watts RMS, I have 2 of the channels powering components up the front and the other 2 channels in bridged mode powering the sub all at 4ohms, goin by the specs will the bridged channel be outputting up to 500watts?
SPECS SLICK A4
Type 4/3/2 Channel
Class AB
Height 65mm
Width 545mm
Depth 245mm
RMS @ 4 Ohm Stereo 4 x 150w
RMS @ 2 Ohm Stereo 4 x 250w
RMS @ 4 Ohm Mono 2 x 500w
RMS @ 2 Ohm Mono -
RMS @ 1 Ohm Mono -
Max Power 2000w
Frequency Response 20 Hz - 20Khz
SNR 90 db
THD 0.8%
Bass Boost 0-24db
HPF 50-1Khz
LPF 30-300Hz
Input mode 2 or 4 Channel
Subsonic filter -
Remote control Optional
Line out -
Pase switch -
Low level input 0.2 - 6v
High level input 0.4 - 12v
Thanks.
Replies:
Posted By: i am an idiot
Date Posted: September 13, 2014 at 6:48 PM
Yes.
Posted By: leigh.white
Date Posted: September 13, 2014 at 7:11 PM
I posted another about setting the gain via a multi Meter approx 40v from my calculations, does it make a difference weather its 40hz 0db or say 40hz -10db?
|