box info for pioneer ts-w3002 12 sub
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137305
Printed Date: May 13, 2025 at 8:46 AM
Topic: box info for pioneer ts-w3002 12 sub
Posted By: supradude
Subject: box info for pioneer ts-w3002 12 sub
Date Posted: September 22, 2014 at 1:11 PM
The info that was with the sub looks to be sort of small amount of cubic foot air space to me. Has anybody got any experience with this sub? It's the sub that says 3500 watts, 12". I want a ported box with the vented slot. Thanks.
-------------
'85 Toy
Replies:
Posted By: tonanzith
Date Posted: September 22, 2014 at 9:00 PM
https://www.pioneerelectronics.com/StaticFiles/Manuals/Pioneer%20TS-W3002%202502%20instruction%20manual.pdf
-------------
Gary Sather
Posted By: supradude
Date Posted: September 22, 2014 at 9:54 PM
Thanks, but that's the same info I've got. 1.5 cubic feet sounds mighty small for a ported box for a 12" sub. Even if it is on their site.
-------------
'85 Toy
Posted By: tonanzith
Date Posted: September 22, 2014 at 9:57 PM
Well depending in how you want it to sound you want it between 1.2 to 1.6 ported. The manufacturer specs are accurate.
-------------
Gary Sather
Posted By: supradude
Date Posted: September 22, 2014 at 9:59 PM
Ok. Thanks a lot. I wanted to make sure.
-------------
'85 Toy
Posted By: tonanzith
Date Posted: September 22, 2014 at 10:00 PM
For best over all sound I'd stick with 1.2. You could actually go as low as .8 but it's not going to give you the best sound. Although sound is relative to the listener.
-------------
Gary Sather
Posted By: supradude
Date Posted: September 22, 2014 at 10:02 PM
Thanks again.
-------------
'85 Toy
|