alpine ixa-w404 pre out
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137388
Printed Date: April 28, 2024 at 11:37 PM
Topic: alpine ixa-w404 pre out
Posted By: paul62462
Subject: alpine ixa-w404 pre out
Date Posted: October 05, 2014 at 3:55 PM
Hello everyone I have an Alpine iXA-W404 that was missing the pre out cable that does the f/r/s output as well as all the cables except for main power. I have cables from other radios that fit but I need to know the correct pin out layout. It is a 24 pin connector for the pre out part, a 6 pin for the rear camera (marked remo) & a 6 pin marked camera 1 next to the power cable. If someone can tell me the config, I would appreciate it.
-------------
Paul C. Duncan
Replies:
Posted By: i am an idiot
Date Posted: October 05, 2014 at 4:05 PM
Posted By: i am an idiot
Date Posted: October 05, 2014 at 4:06 PM
Posted By: paul62462
Date Posted: October 05, 2014 at 5:54 PM
I thank you for the info but I have many plugs that will fit into the radio but, they are not the correct one. I want to repin one of my old plugs to match the alpine. Being I have about 6 old ones laying around from dead units, it makes sense to build one & keep the money in my pocket. But I do thank you for the info.
-------------
Paul C. Duncan
Posted By: i am an idiot
Date Posted: October 05, 2014 at 6:59 PM
Click on the thumbnails. It will open a larger more useable picture. You can see where most of the connections go.
|