oeq-1?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137914
Printed Date: April 29, 2024 at 1:40 PM

Topic: oeq-1?

Posted By: bumpn
Subject: oeq-1?
Date Posted: December 09, 2014 at 7:56 PM

Hey guys. I was wandering if any of you are familiar with the OEQ-1 from Rockford fosgate? I know it's old. but that's really why I bought it. But what I was wandering. would this be best used with my sub amp that I have wired in mono? Or with my other amp for my mids and highs? and would you suggest using it with a crossover like comes with component sets or not? thanks for any help guys! David posted_image

-------------
BASSSS!

Replies:

Posted By: i am an idiot
Date Posted: December 09, 2014 at 8:05 PM

Best if used with both your subs and high end drivers. No need for an external crossover. Unless your amplifiers are from the same era as the EQ, they should have crossovers built into your amplifiers.

Posted By: bumpn
Date Posted: December 09, 2014 at 8:16 PM

ok. it only has 1 set of rca inputs. so do I use Y connectors and run both amps through it to my subs and components without another crossover?

-------------
BASSSS!

Posted By: i am an idiot
Date Posted: December 09, 2014 at 8:52 PM

Does either of your amplifiers have input and output RCA jacks?

Posted By: bumpn
Date Posted: December 09, 2014 at 8:57 PM

yes. both do.

-------------
BASSSS!

Posted By: bumpn
Date Posted: December 10, 2014 at 6:54 AM

ok. i'm just gonna run some "Y" rca connectors from my head unit into this thing and the same on the output...hope for the best!!

Thanks for all the overwhelming help from all you great people!!!

-------------
BASSSS!

Posted By: i am an idiot
Date Posted: December 10, 2014 at 12:05 PM

Out of your deck into the OEQ, out of the OEQ to the input of one amp. Out of that amp into the other amp. No need for a y adapter.

Posted By: bumpn
Date Posted: December 10, 2014 at 2:53 PM

ok. do I use the front, rear, or sub pre-outs?

-------------
BASSSS!

Print Page | Close Window