wiring speakers and subs to amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138295
Printed Date: April 29, 2024 at 9:44 AM
Topic: wiring speakers and subs to amp
Posted By: and1515
Subject: wiring speakers and subs to amp
Date Posted: January 18, 2015 at 4:36 PM
Hi, okay so I recently purchased a new head unit Sony 575up and installed it on the back it has two sets of rca jacks. So I have 4 kenwood speakers in my car on all doors and two subs wired together in the trunk. I have two kenwood amps I have a 1800 watt mono block and a 2/3/4 channel KAC-2404s amp for the speakers. Now here is the problem everything sounds fine the subs work and so do the speaker but when I try to wire the speakers to the amp only the top channels work I can't use the bottoms two channels I tried splitters but that didn't work idk what to do at this point. Right now I habe 3 speakers bridged to one channel and the other on the other channel. And now if I turn the deck up past 22 the amp shuts off so please help I can't figure it out.
-------------
and1515
Replies:
Posted By: sirhutson
Date Posted: February 02, 2015 at 3:44 PM
so you have just front and rear/sw on your head unit? how do you have your RCA's running to your amplifiers?
-------------
Hutson-
|