Print Page | Close Window

Alpine V60 Goes Into Protection

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138441
Printed Date: December 04, 2022 at 6:52 AM


Topic: Alpine V60 Goes Into Protection

Posted By: still_walkin
Subject: Alpine V60 Goes Into Protection
Date Posted: February 07, 2015 at 5:48 PM

ok I have a alpine v60 and just got a 10 alpine swr d4 and I'm connected it to my amp. my amp is 4 ohm and the sub is 4 ohm I usually get 2 ohm subs but I got sent the wrong one and rather send it back I kept it now my question is I think I'm wiring it wrong because after using the bass at a third of the knob the amp goes Into protection and it's not hot then works later on after I turn the car off which is the correct way to wire it 2 ohm or 8

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"



Replies:

Posted By: oldspark
Date Posted: February 07, 2015 at 8:57 PM
8 ohm.

Tho I'd wire it as a singe 4 Ohm for more power PROVIDED I don't overpower it.




Posted By: still_walkin
Date Posted: February 07, 2015 at 9:08 PM
thanks the sub is overrated for the amp it's self I'm wire one channel and try and see what happens. now I get to go climb I'm the trunk and swap the wires I made a fiberglass enclosure in the spare tire space

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"





Print Page | Close Window